Keypad - Xylem WTW Turb 430 IR/T Operating Manual

Turb 430 IR/T
Key functions
ba75507d09 08/2021
1.2

Keypad

.
PRT
.
Switch to the measured value display
<M>
Start calibration
<CAL/ZERO>
Open menus / confirm entries /
start measurement
<START/ENTER>
Call up the Konfiguration menu
(all settings are made here)
<MENU>
Switch the meter on or off
<EIN/AUS>
Output the display contents to the RS232 interface
(e.g. print)
<PRT>
Open the Speichern menu: <STO>
Quick storing: 2 x <STO>
Highlight menu items or selection;
Set values
< >, < >
Switch to the next higher menu level / cancel input
<ESC>
Overview
7