Table of Contents
Advertisement
Operation
Setting the date,
time and date
format
22
System
:
Sprache
Messwertspeicher
Display
Rücksetzen
Schnittstelle
Weiter
Select the required language with < > < >.
6
7
Confirm the setting with <START/ENTER>.
The setting is active. The menu is displayed in the selected language.
8
To make further settings, switch to the next higher menu level with
<ESC>.
4.4.4 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated
in the status line of the measured value display. When storing measured val-
ues and calibrating, the current date and time are automatically stored as
well.
Numerals are generally entered via the number keys.
The correct setting of the date and time and date format is important for the
following functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
Therefore, check the time at regular intervals.
The date and time are reset to default after a fall of the supply
voltage (empty batteries).
The date format can be switched from the display of day, month, year
(TT.MM.JJ) to the display of month, day, year (MM/TT/JJ or MM.TT.JJ).
1
In the measured value display:
Open the Konfiguration menu with <MENU>.
The instrument is in the configuration mode.
Deutsch
Turb 430 IR/T
ba75507d09
08/2021
Advertisement
Table of Contents
