Commissioning; Scope Of Delivery; Power Supply - Xylem WTW Turb 430 IR/T Operating Manual

Handheld turbidimeter
Hide thumbs Also See for WTW Turb 430 IR/T:
Table of Contents

Advertisement

Commissioning

Charging time of
the battery pack
12
3
Commissioning
3.1

Scope of delivery

 Handheld turbidimeter Turb 430 IR or Turb 430 T
 4 batteries 1.5 V type AA (in the battery compartment)
 Optional: battery pack and power pack with Euro plug
and exchange plugs for USA, UK, and Australia
 Optional: LabStation
 5 empty cells 28 mm
with label to mark the cell
®
 AMCO
-Clear turbidity standard
 Microfiber cloth to clean the meter
 Compact operating manual and short operating manual
 CD-ROM with detailed operating manual
The optional parts of the scope of delivery are available as ac-
cessories (see section 8.1).
3.2

Power supply

You can operate the meter either with batteries, battery pack or a power
pack. The power pack supplies the meter with low voltage (9 V DC). At the
same time, the battery pack is charged. The battery pack is charged even
while the meter is switched off.
The LoBat display indicator appears when the batteries or battery pack are
nearly discharged.
approx. 36 hours.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see chapter
7 T
ECHNICAL DATA
Use original power packs only (see chapter 7 T
).
TA
NOTE
The battery pack should not be completely discharged. If you do not op-
erate the instrument for a longer period of time you should charge the
battery pack every six months.
).
Turb 430 IR/T
-
ECHNICAL DA
ba75507d09
08/2021

Advertisement

Table of Contents
loading

This manual is also suitable for:

600325

Table of Contents