Keypad - Xylem SI Analytics HandyLab 200 Operating Manual

HandyLab 200
F1
CAL
STO
RCL
E N T E R
AR
ba77063e03 01/2018
1.1

Keypad

In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <ENTER>) generally indicates a short keystroke
(under 2 sec) in this operating manual. A long keystroke (approx.
2 sec) is indicated by the underscore behind the key symbol (e.g.
_
<ENTER >).
<F1>: Softkey providing situation dependent functions, e.g.:
_
<F1 >: <F1>/[Menu]: Opens the menu for measurement settings
<F2>: <F1
<On/Off>: Switches the meter on or off
<M>: Selects the measured parameter
<CAL>: Calls up the calibration procedure
_
<CAL >: Displays the calibration data
<STO>: Saves a measured value manually
<RCL>: Displays the manually stored measured values
<>: Increments values, scrolls
<>: Decrements values, scrolls
<ENTER>: Opens the menu for measurement settings / confirms
_
<ENTER >: entries
Opens the menu for system settings
<AR> Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
_
>/[Menu]: Opens the menu for system settings
Overview
7