Table of Contents
Advertisement
Commissioning
Connecting the
LabStation
(optional)
14
3.3
Connecting the LabStation
The LabStation is available as an accessory (see section 8.1).
In order to use the functions of the LabStation for operation in the laboratory,
connect the LabStation and place the Turb 430 IR/T in the LabStation.
2
1
If necessary, replace the Euro plug (1) of the power pack (2) by the
country-specific plug suitable for your country.
2
Connect the plug (3) to the socket (4) of the LabStation.
3
Connect a PC or printer to the socket (5) of the LabStation as neces-
sary.
4
Connect the power pack unit to an easily accessible mains socket.
5
Place the Turb 430 IR/T in the LabStation.
1
Turb 430 IR/T
5
4
3
ba75507d09
08/2021
Advertisement
Table of Contents
