Erasing Stored Measurement Datasets; Transmitting Data; Establishing The Connection To A Pc - Xylem WTW Turb 430 IR/T Operating Manual

Operation
Prerequisites
36

4.8.5 Erasing stored measurement datasets

You can erase the stored measurement datasets altogether if you no longer
need them.
Erasing all measurement datasets is done in the menu, Konfiguration / Sys-
tem / Messwertspeicher / Löschen.
Erasing individual datasets is not possible. If all memory loca-
tions are occupied, however, it is possible to overwrite the oldest
dataset at a time. A security prompt appears before a dataset is
overwritten.
4.9

Transmitting data

To transmit data via the interfaces, first establish a connection to a PC or
printer (see section 4.9.1).
With the PC software LS Data you can, without further configuration, transmit
or save measurement and calibration data for GLP-compliant data manage-
ment to LS Data or transmit them to Excel and thus to LIMS.
®
With the MultiLab Importer (an add-in for Microsoft Excel) you can transmit
data from the meter directly to an open Excel sheet (see section 4.9.3).
The connection to a printer or terminal program has to be configured so data
can be safely transmitted (see section 4.9.4).

4.9.1 Establishing the connection to a PC

You have the following possibilities of transmitting data from the Turb 430 IR/
T to a PC
 via the RS232 interface of the Turb 430 IR/T
or
 via the RS232 interface of the LabStation LS Flex/430
(accessories, see chapter 8)
 Microsoft Windows PC with one of the following operating systems:
– Windows 7
– Windows 8
– Windows 10.
 Free interface of the PC
– Serial COM interface
Turb 430 IR/T
ba75507d09 08/2021