Turb 430 IR/T
Establishing a
connection
ba75507d09
08/2021
or
– USB interface:
and USB adapter (accessory)
Connection to the PC
– Connecting cable AK 540/B (accessory, see chapter 8)
or
– LabStation LS Flex/430 (accessory, see chapter 8)
1
Connect the Turb 430 IR/T to the PC via the RS232 or
via the LabStation LS Flex/430 (see operating manual LS Flex/430).
The connection to the PC is established. The data can be transferred
to the PC:
via the PC software LS Data (see section 4.9.2)
via the MultiLab
via a terminal program (see section 4.9.6).
4.9.2 Data transmission with the PC software LS Data
With the PC software LS Data you can transmit and save to the LS Data any
measurement- and calibration data for GLP compliant data management
(menu item Datei / Speichern unter... / *. csv (CSV format)) or transmit and
save to Excel (menu item Datenaustausch / Export (.xls)) and thus transfer
to LIMS.
1
Establish the connection to a PC (see section 4.9.1).
2
Transmit data (see operating manual of the PC software LS Data).
4.9.3 Data transmission with the Excel add-in MultiLab
Set the CSV output format for datasets at the Turb 430 IR/T. It is
selected in the menu, Konfiguration / System / Schnittstelle /
Ausgabeformat (see section 4.9.5 E
TION TO A PRINTER
1
Establish the connection to a PC (see section 4.9.1).
2
Establish a data connection (see operating manual
®
MultiLab
Importer).
3
Transmit data (see section 4.9.6).
®
Importer (see section 4.9.3)
).
Operation
®
Importer
STABLISHING THE CONNEC
-
37