Filtering Measurement Datasets - Xylem WTW Turb 430 IR/T Operating Manual

Operation
If the memory is
full
Data filter
34
(
Speichern 996 frei
i 15.01.2021 11:24:16
16.80 FNU/NTU
ID vergeben:
Speichern (ID: 1)
Using < > < >, <START/ENTER> and the number keys, change
2
and confirm the ID number (ID) as necessary (0 ... 999).
3 Using <START/ENTER> or <STO>, confirm Speichern.
The dataset is stored. The meter switches to the measured value dis-
play.
A measurement dataset is quickly stored by twice pressing
<STO>. It is stored with the ID last set.
You can erase the entire memory (see section 4.8.5), or overwrite the oldest
dataset with the next storing procedure.
A security prompt appears before a dataset is overwritten.

4.8.2 Filtering measurement datasets

The functions to display and download stored measurement datasets (see
section 4.5.1) refer to all stored measurement datasets that correspond to
the specified filter criteria.
The settings are in the menu, Konfiguration / System / Messwertspeicher /
Datenfilter.
Move to the Konfiguration menu with the <MENU> key.
Menu item Setting/function
Filter
Kein Filter
ID
Datum
ID + Datum
)
1
Explanation
Filter criteria:
Data filter switched off
Selection according to ID num-
ber
Selection according to period
Selection according to period
and ID number
Turb 430 IR/T
ba75507d09 08/2021