Turb 430 IR/T
Representation of
a dataset
Quitting the dis-
play
ba75507d09
08/2021
Menu item
Setting/function
ID
Datum
4.8.3 Displaying measurement datasets
You can read out stored datasets to the display. Only those datasets are dis-
played that correspond to the selected filter criteria (see section 4.8.2).
Start reading out the data to the display in the menu, Konfiguration / System
/ Messwertspeicher / Anzeigen.
15.01.2021 11:24:16
ID: 1
16.80 FNU/NTU
[QuickCAL]
09.01.2021 07:54:53
i Blättern mit UP DWN
Further datasets that correspond to the filter criteria are displayed with the
< > < > keys.
To quit the display of stored measurement datasets, you have the following
options:
Switch directly to the measured value display with <M> (short pressure).
Leave the display and switch to the superordinate menu with <ESC> or
<START/ENTER>.
4.8.4 Outputting measurement datasets to the interfaces
You can output stored datasets to the interface. Only those datasets are
downloaded that correspond to the selected filter criteria (see section 4.8.2).
The datasets are downloaded in the specified output format (see
section 4.9.5).
The output of the data to the interface is started in the menu, Konfiguration /
Messwertspeicher / Ausgabe RS232.
Explanation
Entry of filter criteria
These menu items are made vis-
ible by selecting the filter criteria
in the Filter menu.
Operation
35