Table of Contents
Advertisement
Turb 430 IR/T
ba75507d09
08/2021
5.1.2 Retrofitting the battery pack
NOTE
Use original WTW battery packs only.
Together with the power pack the battery pack is available as an accessory
(see section 8.1).
1
Open the battery compartment:
– Unscrew the two screws (1) on the underside of the meter
– Remove the lid of the battery compartment (2).
2
If necessary, take four old batteries out of the battery compartment.
3
Connect the cable of the battery pack with the socket (3) on the bot-
tom of the battery compartment and insert the battery pack in the bat-
tery compartment.
4
Close the battery compartment and fix it with the screws.
Maintenance, cleaning, disposal
1
2
3
45
Advertisement
Table of Contents
