Act-Pak® Electronic Instrumentation
Act-Pak® Remote Monitoring is an automatic control translator package. The Model 1100D
is a standard NEMA1 free standing or panel mountable enclosure. The Model 1100DN is
a NEMA4X wall mountable fiberglass enclosure. Each Act-Pak device accepts pulses or
contact closures from metering devices and provides a variety of outputs.
Front Panel Display and Buttons
The display is an eight digit transmissive red LCD,
0.46" high. A green LCD is also available. For
outdoor or high ambient light conditions, reflective
readouts will be supplied.
SELECT: Toggles display and advances menu
selection in the programming mode.
RESET: Resets counter to zero if enabled and
changes display in programming mode.
COUNT DISPLAY: 8-digit, display flashes "tot" over
for an overflow condition.
RATE DISPLAY: 6-digit with an enunciator "R" on the
left side.
Physical Size/Weight
Model
1100D
Length
8-3/4" (22 cm)
Height
3-1/8" (8 cm)
Width
8-9/16" (23 cm)
Weight
4 lbs. (1.8 kg)
Memory
Non-volatile E2PROM memory retains all
programming parameters and the count value when
power is removed.
Models 1100D and 1100DN Quick Guide
1100DN
8-1/2" (21.6 cm)
4-1/4" (11 cm)
6-1/2" (16.5 cm)
4 lbs. (1.8 kg)
Electrical Connections
1. Complete all connections to the metering device
and instrument before applying power.
2. If it becomes necessary to disconnect any of these
connections, first remove the AC power to the
instrument.
Meter or Signal Output
Terminal
Function
Wire Color
Number
Switch Inputs
(Belden 8760)
13
+12VDC
No Connection
16
Input Signal
White
14
Ground
Black
15
Shield
Bare (Shield)
Typical Series 1100 Act-Pak Wiring Connection Diagram
QUI CK G UI DE
Wire Color Solid
State Inputs
(Belden 8770)
Red
White
Black
Bare (Shield)
WQG-10029-01