Settings; Measurement Settings (Ph); Changing The Settings For Ph Measurements - Xylem SI Analytics Lab 855 Operating Manual

Settings

7 Settings
Settings for pH measurements
28
The meter has separate setting routines for the measurement settings and
system settings.
7.1

Measurement settings (pH)

7.1.1

Changing the settings for pH measurements

1. Open the setting menu in the measured value display with <M__>.
The first setting is displayed.
2. If necessary, indicate the required setting with <ENTER>.
3. To change the current setting, press <><>.
4. Confirm the setting with <ENTER>.
The next setting is displayed.
5. Change or confirm the other settings.
When the last setting is confirmed, the setting menu is auto-
matically quit.
or
Quit the setting menu with <M>.
The settings are stored.
Default settings are printed in bold.
The settings appear in the following order:
Displayed
(Confirm with
<ENTER>)
pH bUFF pH
U
pH SLO mV/pH
%
pH ASY mV
pH
Possible setting
(Change with
<><>)
Display during calibration
Nominal buffer value (pH) or
Electrode voltage (U)
Unit of the value for the slope
Unit of the value for the zero point
Lab 855
Description
ba77143e02 12/2017