Example 2 On Navigation: Setting The Date And Time - Xylem SI Analytics HandyLab 200 Operating Manual

Operation
Setting the date, time
and date format
20
7 Open the setting mode for the Language with <ENTER>.
General
Language:
:
Illumination
:
Contrast
:
Switchoff time
15.03.2014
Back
10:00
8 Select the required language with <><>.
9 Confirm the setting with <ENTER>.
The meter switches to the measuring mode.
The selected language is active.

4.2.4 Example 2 on navigation: Setting the date and time

The meter has a clock with a date function. The date and time are indi-
cated in the status line of the measured value display.
When storing measured values and calibrating, the current date and
time are automatically stored as well.
The correct setting of the date and time and date format is important for
the following functions and displays:
 Current date and time
 Calibration date
 Identification of stored measured values.
Therefore, check the time at regular intervals.
Note
The date and time are reset to default after a fall of the supply voltage
(empty batteries).
The date format can be switched from the display of day, month, year
(dd.mm.yyyy) to the display of month, day, year (mm/dd/yyyy or
mm.dd.yyyy).
Deutsch
On
48 %
30 min
ba77063e03
HandyLab 200
01/2018