2.5.2 Wiring Examples - Siemens SIMATIC NET RUGGEDCOM RSG907R Installation Manual

4.
5.
2.5.2 Wiring Examples
The following illustrate how to connect single and dual power supplies to the device.
RUGGEDCOM RSG907R
Installation Manual, 02/2020, C79000-G8976-1387-09
c. Connect the ground wire to the
chassis/ground terminal on the
terminal block.
Connect the chassis ground screw to ground (Potential Earth). It is recommend-
ed to terminate the ground connection with an M4 ring or spade lug, and then
torque to 1.7 N·m (15 lbf-in).
M4 Screw
1
M4 Ring Lug
2
Figure 2.10 Chassis Ground Connection
Connect the power cable to the power source.
1
2
Installing the Device
2.5.2 Wiring Examples
15