Installing The Device; Unpacking The Device - Siemens SIMATIC NET RUGGEDCOM RSG907R Installation Manual

Installing the Device

The following sections describe how to install the device, including mounting the de-
vice, installing/removing modules, connecting power, and connecting the device to
the network.
Electrocution hazard – risk of serious personal injury and/or damage to equip-
ment
Before performing any maintenance tasks, make sure all power to the device has
been disconnected and wait approximately two minutes for any remaining energy
to dissipate.
Radiation hazard – risk of serious personal injury
This product contains a laser system and is classified as a Class I LASER PRODUCT.
Use of controls or adjustments or performance of procedures other than those speci-
fied herein may result in hazardous radiation exposure.
IMPORTANT
This product contains no user-serviceable parts. Attempted service by unauthorized
personnel shall render all warranties null and void.
Changes or modifications not expressly approved by Siemens AG could invalidate
specifications, test results, and agency approvals, and void the user's authority to
operate the equipment.
IMPORTANT
This product should be installed in a restricted access location where access can only
be gained by authorized personnel who have been informed of the restrictions and
any precautions that must be taken. Access must only be possible through the use of
a tool, lock and key, or other means of security, and controlled by the authority re-
sponsible for the location.
2.1

Unpacking the Device

When unpacking the device, do the following:
1.
2.
RUGGEDCOM RSG907R
Installation Manual, 02/2020, C79000-G8976-1387-09
DANGER
WARNING
Inspect the package for damage before opening it.
Visually inspect each item in the package for any physical damage.
2
5