Configuring The Device - Siemens SIMATIC NET RUGGEDCOM RSG907R Installation Manual

Device Management
3.2 Configuring the Device
Ethernet Ports
Connect any of the available Ethernet ports on the device to a management switch
and access the RUGGEDCOM RSG907R console and Web interfaces via the device's
IP address. The factory default IP address for the RUGGEDCOM RSG907R is
192.168.0.1.
For more information about available ports, refer to
25)".
3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM RSG907R interface. For
more information about configuring the device, refer to the RUGGEDCOM RSG907R
User Guide associated with the installed software release.
24
"Communication Ports (Page
RUGGEDCOM RSG907R
Installation Manual, 02/2020, C79000-G8976-1387-09
https://-