Certification; Approvals; Csa - Siemens SIMATIC NET RUGGEDCOM RSG907R Installation Manual

Certification

The RUGGEDCOM RSG907R device has been thoroughly tested to guarantee its con-
formance with recognized standards and has received approval from recognized reg-
ulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RSG907R complies.
6.1.1

CSA

This device meets the requirements of the following Canadian and U.S. standards un-
der certificate CSA 18CA70171440:
•
•
•
•
•
•
•
RUGGEDCOM RSG907R
Installation Manual, 02/2020, C79000-G8976-1387-09
CAN/CSA C22.2 No. 60950-1-07 AMD 2:2014
Information Technology Equipment – Safety – Part 1: General Requirements
CSA Std. C22.2 No. 213-16
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Loca-
tions
CAN/CSA-C22.2 No. 60079-0:15
Explosive Atmospheres – Part 0: Equipment – General Requirements
CAN/CSA-C22.2 No. 60079-15:16
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection "n" Electrical Apparatus
ANSI/UL 60950-1-2014
Information Technology Equipment – Safety Part 1: General Requirements
ANSI/ISA-12.12.01-2015
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
ANSI/UL 60079-0:13
Electrical Apparatus for Explosive Gas Atmospheres – Part 0: General Require-
ments
6
35