D1Xx3Y01 To D1Xx3Yf2 Service Processor Dump Codes - IBM PS703 Service Manual

Table 24. D1001xxx to D1xx3FFF dump codes (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
D1381xxx
D1391xxx
D13A1xxx
D13B1xxx
D1FF1xxx
D1xx3000 - D1xx3FFF

D1xx3y01 to D1xx3yF2 Service processor dump codes:

These D1xx3yxx service processor dump codes use the format: D1xx3yzz, where xx indicates the cage or
node ID that the dump component is processing, y increments from 0 to F to indicate that the system is
not hung, and zz indicates the command being processed.
138
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Description
Invalidate the dump
Check for valid dump sequence
Get dump identity sequence
Get dump length sequence
Dump complete
Platform dump status codes are described in "D1xx3y01 to D1xx3yF2 Service processor
dump codes"
Action
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.