B1Xxyyyy Service Processor Srcs; B200Xxxx Logical Partition Srcs - IBM PS703 Service Manual

B1xxyyyy service processor SRCs

A B1xxyyyy system reference code (SRC) is an error code that is related to an event or exception that
occurred in the service processor firmware.
To find a description of an SRC that is not listed in this PS703 or PS704 blade server documentation, refer
to the POWER7 Reference Code Lookup page at http://publib.boulder.ibm.com/infocenter/systems/
scope/hw/index.jsp?topic=/ipha8/codefinder.htm.
Note: For problems persisting after completing the suggested actions, see "Solving undetermined
problems" on page 223.

B200xxxx Logical partition SRCs

A B200xxxx SRC is a logical partition reference code that is related to logical partitioning.
Table 16 describes system reference codes that might be displayed if system firmware detects a problem.
Suggested actions to correct the problem are also listed.
Note: For problems persisting after completing the suggested actions, see "Checkout procedure" on page
176 and "Solving undetermined problems" on page 223.
Table 16. B2xxyyyy Logical partition SRCs
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Reference Code Description
B2001130 A problem occurred during the
migration of a partition
You attempted to migrate a partition
to a system that has a power or
thermal problem. The migration will
not continue.
B2001131 A problem occurred during the
migration of a partition.
The migration of a partition did not
complete.
B2001132 A problem occurred during the
startup of a partition.
A platform firmware error occurred
while it was trying to allocate
memory. The startup will not
continue.
B2001133 A problem occurred during the
migration of a partition.
The migration of a partition did not
complete.
B2001134 A problem occurred during the
migration of a partition.
The migration of a partition did not
complete.
40
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Action
Look for and fix power or thermal problems and then
retry the migration.
Check for server firmware updates; then, install the
updates if available.
Collect a platform dump and then go to "Isolating
firmware problems" on page 216.
Check for server firmware updates; then, install the
updates if available.
Check for server firmware updates; then, install the
updates if available.