Table of Contents
Advertisement
Table 21. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
C2008060
C2008080
C20080A0
C20080FF
C2008100
C2008104
C2008110
C2008120
Description
End transfer slot locks to partition
Begin transfer VIO slot locks to partition 1. Go to "Recovering the system firmware" on
End transfer VIO slot locks to partition
Hypervisor low-level session manager
object is ready
Initializing service processor
communication area #2
Loading data structures into main store
Initializing event paths
Starting processor(s)
Action
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
Chapter 2. Diagnostics
113
Advertisement
Table of Contents
