Table of Contents
Advertisement
Figure 5. PS704 system base-unit connectors
The following figure shows the connectors on the expansion-unit system board in the PS704 blade server.
Figure 6. PS704 system expansion-unit connectors
The following table identifies and describes the connectors for the PS704 blade server.
Table 4. PS704 connectors
Callout
PS704 blade server connectors
1
Operator panel connector
2
Expansion connector
3
DIMM connectors (See Figure 8 on page 11 for individual connectors.)
4
3 V lithium battery connector (P1-E1)
5
Management card connector
6
2.5" SAS HDD (P1-D1) or 1.8" SATA SSD (P1-C18, P1-C18-D1, P1-C18-D2) carrier
7
CIOv expansion card connector (P1-C19)
8
High-speed (CFFh) expansion card connector (P1-C20)
9
DIMM connectors (See Figure 8 on page 11 for individual connectors.)
10
2.5" SAS HDD (P2-D1) or 1.8" SATA SSD (P2-C18, P2-C18-D1, P2-C18-D2) carrier
11
CIOv expansion card connector (P2-C19)
10
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Advertisement
Table of Contents
