IBM PS703 Service Manual page 164

Table 27. 101-711 through FFC-725 SRNs (continued)
SRN FFC
2624-201 cable
network
2624-301 cable
network
2624
2624-701 2624
2624-702 2624
2624-703 2624
2624-704 2624
2624-705 2624
2624-706 2624
2625-xxx 2625
2625-101 2625
2625-102 2625
2625-103 2625
2625-201 cable
network
2625-301 cable
network
2625
152
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Description and Action
Loop back test failure. Do the following steps one at a time, in order, and rerun the test
after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
4. Verify that the network switch is functional.
Loop back test failure. Do the following steps one at a time, in order, and rerun the test
after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
4. Verify that the network switch is functional.
5. Go to "Performing the checkout procedure" on page 177.
Error Log Analysis indicates that this adapter has failed due to an internal error.
Replace the 4X PCI-E DDR InfiniBand Host Channel Adapter.
Error Log Analysis indicates that this adapter has failed due to a failure with the
uplink interface used to connect this device to the host processor. Replace the 4X PCI-E
DDR InfiniBand Host Channel Adapter.
Error Log Analysis indicates that this adapter has failed due to a memory error.
Replace the 4X PCI-E DDR InfiniBand Host Channel Adapter.
Error Log Analysis indicates that this adapter has failed due to a unrecoverable
internal parity error Replace the 4X PCI-E DDR InfiniBand Host Channel Adapter.
Error Log Analysis indicates that this adapter has failed due to a internal error. Replace
the 4X PCI-E DDR InfiniBand Host Channel Adapter.
Error Log Analysis indicates that this adapter has failed due to a memory error.
Replace the 4X PCI-E DDR InfiniBand Host Channel Adapter.
Generic reference for 2-port QDR 40 GB/S InfiniBand expansion card (CFFh). Go to
"Performing the checkout procedure" on page 177.
Configuration failure. Replace the 2-port QDR 40 GB/S InfiniBand expansion card
(CFFh).
Queue pair create failure. Replace the 2-port QDR 40 GB/S InfiniBand expansion card
(CFFh).
Loop back test failure. Replace the 2-port QDR 40 GB/S InfiniBand expansion card
(CFFh).
Loop back test failure. Do the following steps one at a time, in order, and rerun the test
after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
4. Verify that the network switch is functional.
Loop back test failure. Do the following steps one at a time, in order, and rerun the test
after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
4. Verify that the network switch is functional.
5. Go to "Performing the checkout procedure" on page 177.