Deleting The Cameras; Configuring The Advanced Discovery Settings; Configuring The Schedules - Honeywell MAXPRO NVR XE Operator's Manual

C O N F I G U R I N G M A X P R O N V R
3
To update a camera
1.
2.
3.
4.
5.
D
ELETING THE CAMERAS
To delete a camera
1.
2.
3.
4.
5.
C
ONFI GURING THE ADVANCED DISCOVERY SETTI NGS
The advanced discovery settings enable you to choose between NTSC and PAL format for a
camera. Advanced discovery settings can be configured for cameras connected to MAXPRO
NVR.
Note:
To configure the Advanced Discovery Settings
1.
Note:
Note:
C
O NF IG U R IN G T H E S C H E D U L E S
A schedule defines the date and times when continuous background recording and video
analytics (motion detection) functions are enabled for a camera.
42
Click the Configurator tab. The System page displays by default.
Click the Camera tab to navigate to the Camera page. The list of cameras configured are
displayed.
Select the row corresponding to the camera you want to modify.
Change the settings such as camera name, IP address, and so on.
Click Save.
Click the Configurator tab. The System page displays by default.
Click the Camera tab to navigate to the Camera page.
Select the check box corresponding to the camera you want to delete.
Click Delete. A confirmation message appears at the bottom of the display area.
Click Yes. The selected camera is deleted.
Advanced Discovery Settings is only applicable for a PSIA camera.
On the Camera page>Advanced Discovery Settings pane, perform the following:
• Select "NTSC" or "PAL" from Set Video Format.
• Type a Username for the camera.
• Type a Password for the camera.
You are prompted to type the username and password only for a PSIA camera.
• Click Apply to save the changes or click Reset to clear the information entered.
The username and password entered is applicable for all NTSC or PAL cameras.
However, the username and password can be changed while configuring a
particular camera.
MAXPRO NVR Operator's Guide