Configuring Advanced Network Settings; Configuring Pppoe Settings - Honeywell HRGX45 User Manual

Configuring Advanced Network Settings

This section describes how to configure PPPoE, DDNS, NTP, SNMP, UPnP, Multicast, RTSP,
server port, and HTTP port settings.

Configuring PPPoE Settings

The HRGX supports Point-to-Point Protocol over Ethernet (PPPoE) network connections.
To configure PPPoE settings:
1.
2.
3.
4.
Note Instructions for configuring email and remote alarm host settings are found in
Chapter 8, Configuring Alarm
Go to Menu > Settings > Network > PPPOE.
Select the Enable PPPOE check box to enable a PPPoE network connection.
In the User Name and Password fields, enter the user name and password assigned by
your Internet service provider for PPPoE access.
Click Apply to save your settings, and then restart the DVR for the change to take effect.
The PPPoE connection will initiate automatically.
To view PPPoE connection information, go to Menu > Maintenance > System Info >
Network.
Configuring Network Settings | 103
Settings.
800-16694 - A - 04/2014