Standard Ir Remote And Transmission; Wired Ir Remote - Christie Roadie HD+35K Setup Manual

Section 3: Operation

3.2.2 Standard IR Remote and Transmission

The Roadie HD+35K comes with a standard IR remote which controls the projector by way of wireless
communication from a battery-powered infrared (IR) transmitter. Use the standard IR remote the same way
you would use any remote supplied with a TV or DVD player.
When pressing any key, ensure that you direct the remote either toward the screen or toward the front or rear of
the projector. One of the two IR sensors on the projector detects the signals and relays the commands for
internal processing.
Refer to the key descriptions provided for the standard IR remote

3.2.3 Wired IR Remote

Should you require a wired connection, use the cable (100 ft. cable supplied) to connect to the 3-pin XLR jack
connector (Figure
settings accordingly. The wired standard IR remote is recommended when:
• The rear built-in keypad is inaccessible
• The lighting conditions are unsuitable for proper IR transmission
3-4
3-4) located at the rear of the projector. You also need to set the proper internal jumper
Cable
For wired use only
• Display from this
source
Contrast
• Adjust difference
between light/dark
Brightness
• Adjust amount
of light in image
• Select ahighlighted
menu item
• Change a value
• Accept a changed
value
Arrow Keys
• Adjust asetting
up/down
• Navigate within menu
Input
• Selecta source
using number keypad
Number Keys
Enter a number,
suchas channel,
input, projector, etc.
(Can be set to select
inputs directly, if desired.)
Shutter*
• Open or close lens
OSD*
• Hide or show menus
Press and hold to toggle or p ress twice to toggle or press
Figure 3-4 Standard IR Remote Keypad
(Figure 3-4).
Lens Functions
• requires
motorized lens
Auto
• Optimize image
automatically
PIP
• Turn picture-in-
picture on/off
Swap
• Swap PIP images
Gamma
• Adjust mid-range
levels
Menu
• Display menus
(toggle)
Lightbulb
• Illuminate keys
Exit
• Return to previous
menu level
Channel
•Select channel (setup)
Projector
•Select projector
Help
• Display context-
sensitive help
(toggle)
Test
• Display a test pattern
Func
• Enter special code
such as color enabling.
Power*
• Turn projector on/off
and release, followed by ON or OFF
Roadie HD+35K Setup Guide
020-100394-02 Rev. 1 (01-2010)