Handles; Channels For Fredframe; Security Locks; Using The Built-In Keypad Or Remotes - Christie Roadie HD+35K Setup Manual

3.1.4 Handles

Mounted to the bottom of the projector is the handles assembly, which allows for transportation of the
projector over a short distance. The handles can also be used to hoist a single projector only. For rigging
purposes, the weight of the projector must not exceed 435 lbs. (197.3 kg.) including the handles.
Any overhead suspension used MUST be suitably rated for the weight of the projector.
NOTE:
Installations which require the stacking of projectors must use the FredFrame™. The handles assembly must
first be removed to expose the projector's channels, and allow for installation of the FredFrame™.

3.1.5 Channels for FredFrame™

An adjustment mechanism (part of Christie's FredFrame™) that is inserted and secured into the channels
located under the projector, enables the projector to be hoisted, flown, and/or stacked. Consult complete
installation instructions supplied with the FredFrame™ Kit.

3.1.6 Security Locks

Critical internal components and/or connections are protected by standard medium-security locks. This
safeguard helps ensure access by authorized personnel only. Remaining panels are not removable with
standard tools, or they are blocked by other obstacles that prevent theft or tampering.
3.2

Using the Built-In Keypad or Remotes

The projector is typically controlled using one of the following:
• The built-in keypad
• The standard IR remote
While the built-in keypad or standard remote provides complete control of the projector, they differ slightly in
their arrangement of keys and in what functions can be accessed directly with a key press, rather than requiring
use of the Menu system. You may find the built-in keypad or the standard IR remote more convenient for your
specific installation and application.

3.2.1 Built-in Keypad

To control the projector when signals from a standard IR remote cannot reach the projector, you can use the
projector's built-in keypad, located at the rear of the projector. Two nearby windows provide feedback
indicating current status and activities of the projector. Because the built-in keypad has fewer keys than the
standard IR remote, certain projector functions are accessible only through the Menu system.
Power key
Roadie HD+35K Setup Guide
020-100394-02 Rev. 1 (01-2010)
(Figure 3-3) located at the rear of the projection head
(Figure 3-4) wired (includes a 100 ft. cable) or wireless control up to 100 feet
Auto
Menu
Setup
Lens
Focus Zoom Help
Shift
Shutter Exit
Figure 3-3 Built-in Keypad at Rear of Projector
Enter key
Input 1
Input 2
BNC DVI
Input 3 Input 4
Video S-Vid
Input 5 Input 6
Opt.1 Opt. 2
Section 3: Operation
3-3