Msm Leds; I/O Module Cards - Extreme Networks BlackDiamond 6800 Hardware Installation Manual

B D O
LACK IAMOND VERVIEW
For more information on adding or removing DIMMs, refer to
MSM LED
S
Table 1-4 describes the LED behavior on the MSM.
Table 1-4: MSM LEDs
LED Color
SYS Green (blinking)
Amber (blinking)
Amber
Off
MSTR Green
Amber
ENV Green
Amber
ERR Amber
Off
I/O M C
ODULE ARDS
The BlackDiamond 6800 system has four I/O modules, as follows:
• G4X module
• G6X module
• F32T module
• F32F module
I/O modules can be inserted or de-inserted at any time, without causing disruption of
network services. No configuration information is stored on the I/O module; all
configuration information is stored on the MSM.
When the BlackDiamond 6800 is powered on, the system software generates a default
configuration for any slots that are occupied with I/O modules. The default
configuration allows the I/O module ports to participate in the VLAN default.
1-12
Indicates
Normal operation
Diagnostic test in progress
Diagnostic failure
No power
Master MSM
Slave MSM
Environment (temperature, fan, power supply) is operating
properly
Environmental failure
Critical software error logged since power up
Normal operation
Chapter 3.
B D H I
LACK IAMOND ARDWARE NSTALLATION
G
UIDE