Msm Leds; Installing Msms - Extreme Networks e” series Hardware Installation Manual

MSM LEDs

Table 52 describes the LED activity on the MSM.
Table 52: MSM LEDs
LED
SYS
MSTR
ENV
ERR
Link/Activity
NOTE
To reset the critical software error LED (amber ERR LED), use the
reboot the switch. If you continue to have critical software errors, or the ERR LED is amber after the
clear log static

Installing MSMs

The BlackDiamond MSM is hot-swappable. You do not need to power off the system to insert an MSM.
You need the following tools and equipment to install an MSM:
• ESD-preventive wrist strap
• # 1 Phillips screwdriver
To install the MSM:
1 Attach the ESD strap to your wrist and connect the metal end to the ground receptacle on the top
left corner of the switch front panel.
2 Select a slot for the module:
• Slots A through D in the BlackDiamond 6816
• Slots A through B in the BlackDiamond 6808 and BlackDiamond 6804
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide
Color Indicates
Green blinking Normal operation is occurring
Amber blinking Diagnostic test is in progress
Amber Diagnostic failure has occurred
Off Switch is not receiving power
Green Module is operating as master
Amber Module is operating as slave
Green Environment (temperature, fan, power
supply) is operating properly
Amber Environmental failure has occurred
Amber A critical software error has been logged
since power up
Off Normal operation is occurring
Off Link is down
Green Link is up
Amber Packet activity is occurring
command and a switch reboot, contact Extreme Networks Customer Support.
command and
clear log static
Installing MSMs
257