Frequently Asked Programming Questions - NEC DS1000 Quick Setup Manual

Section 1: Start-up Programming

Frequently Asked Programming Questions

If you have this question:
General
How do I enter the Programming Mode and change
the system's options?
How do I add or Delete PCBs in DS2000?
I want to default the system. What are the steps?
Can I change the system password?
Trunks and Ringing
How do I turn trunk ringing on or off for certain
extensions?
How can I make single line telephones ring for
incoming calls?
I have DP (Dial Pulse) trunks, but the system default
is DTMF. How do I make my trunks DP?
How do I place outgoing calls from single line
telephones?
Extension Setup
When I plug in 34-Button Telephones, the last 2 rows
of keys don't work. How do I fix this?
What do I program to restrict access from certain
extensions to certain trunks?
We have a group of phones that should ring for each
other's calls. How do I set this up?
How do the User Programmable Features work?
Voice Mail Setup
How do I set up Voice Mail?
Can I make the Voice Mail answer only at night?
If a call rings an extension and does not get picked
up, can I have Voice Mail answer it?
1-2 Section 1: Start-up Programming
Go here:
Programming the System on page 1-3.
Using Program 9902 in DS2000 to Add or
Delete PCBs on page 1-5.
Reloading the System Default Settings on
page 1-15.
Changing the System Password on page 1-15.
Programming Ringing at Keysets on page 1-7.
Programming Ringing at Single Line Tele-
phones on page 1-8.
Setting a Trunk's Circuit Type on page 1-6.
Placing Outgoing Calls from Single Line Tele-
phones on page 1-9.
Setting an Extension's Circuit Type on page 1-
6.
Setting Up Trunk Access Restrictions on
page 1-10.
Call Coverage on page 1-16.
User Programmable Features on page 1-17.
Basic Voice Mail Programming on page 1-11.
Set Voice Mail to Answer at Night on page 1-
13.
Having Voice Mail Pick Up Unanswered Calls
on page 1-13.
DS1000/2000 Quick Setup Guide