4.2 Screen Protective film
Please remove the protective film from the display
before usage.
4.3 Installing modules
4.3.1 SAM1/SAM2/SIM1/SIM2
WARNING
Switch off the terminal before opening the battery door.
The SAM/SIM connectors are located inside the terminal, in a closed compartment.
Turn the terminal and remove the battery door.
SAM1, SAM2 and SIM1, SIM2 are identified by the engraved marks on the lower housing.
When introducing a SAM/SIM into slot, be sure to put the cut corner as indicated on the
picture.
AXIUM EX8000
11/17
13
Banks and Acquirers International Holding SAS
Copyright© 2022Ingenico–
All rights reserved