Mecmesin MultiTest-x Series Operating Instructions Manual page 58

[1], [3], [2], [2] Set Limits
1) Procedure 1
2) Print Menu
Press
3) Setup Menu
[1/Menu]
4) Utilities Menu
[1], [3], [2], <3> Auto Xmit Res-OFF
1) Procedure 1
2) Print Menu
Press
3) Setup Menu
[1/Menu]
4) Utilities Menu
Appendix 6: MultiTest-x Menu Options Page 6
1) Acquisition Menu
Press
2) Analysis Menu
[3]
3) Control Menu
1) Acquisition Menu
Press
2) Analysis Menu
[3]
3) Control Menu
1) Select Analysis
2) Set Limits
Press
3) Auto Xmit Res-OFF
[2]
4) Calculate Results
Type in a value and press [Start/ENT]
to store and dis play the se t lim its
screen for the next calculation. Once
the limits of the final calculation is
specified press [Start/ENT]
1) Select Analysis
2) Set Limits
Press
3) Auto Xmit Res-OFF
[2]
4) Calculate Results
Screens displayed
will depend on what
Limit Type has been
set (See [1],[4],<2>)
Pk Ld <>Disp
Press
Targ( N):
[2]
Limits=0 to Disable
Press [Start/ENT] x 2 to
disable the set limits facility
Thi s c an on ly
or
be selected if a
type in a value and press
calculation has
[Start/ENT]
bee n se tup in
Select Analysis
Pk Ld <>Disp
Targ( N):
Tol(%):
Limits=0 to Disable
Press
If ON is selected results will
<3>
automatically be uploaded to
to toggle between
a PC or datalogger via the
ON and OFF
RS232 port
0
0