Kubota RTV-X900G Operator's Manual page 45

(1) Pin (H) High height (highest hole)
(2) Seat bracket
A When changing pin height, be careful not to mistake
the pin angle.
OPERATING THE VEHICLE
After changing seat height, set the rear snap pin.
(1) Pin
(2) Snap pin (rear)
(3) Seat bracket
7. Do the reverse procedure of No. 1, 2, 3 to lower the
seat.
8. Detach the front snap pin.
(1) Snap pin (front)
9. Detach the seat from frame.
When detach the seat, be careful not to pinch the hand
between seat and bracket.
When changing the seat height, hold seat tightly in
your hands.
23