Checking Backup Beeper; Every 50 Hours; Greasing - Kubota RTV-X900G Operator's Manual

BChecking Backup Beeper
[if equipped]
1. Sit on the operator's seat.
2. Set the parking brake and stop the engine.
3. Shift the range gear shift lever to the "NEUTRAL"
position.
4. Turn the key to "ON" position.
5. Shift the range gear shift lever to the "REVERSE"
position.
6. If the backup beeper does not beep, consult your local
KUBOTA Dealer.
(1) Range gear shift lever
(2) Backup beeper (if equipped)
(R) "REVERSE"
PERIODIC SERVICE

EVERY 50 HOURS

BGreasing
Apply a small amount of multi-purpose grease to the
following points every 50 hours: If you operated the
vehicle in extremely wet and muddy conditions, lubricate
grease fittings more often.
(1) Parking brake lever (spray type grease)
(1) Battery terminals
(1) Cargo lift cylinder pivot (Grease fitting)
(2) Cargo bed pivot (spray type grease)
71