Kubota RTV-X900G Operator's Manual page 44

22 OPERATING THE VEHICLE
4. Detach the rear snap pin.
(1) Snap pin (rear)
5. Detach the pin and take off the seat bracket.
(1) Pin
(2) Seat bracket
6. Set the bracket to the height which you want to.
Seat can be set as below 3 modes.
(N) Normal height
(L) Low height
(H) High height
At Normal height, use center rear hole.
At Low height, use lowest hole.
At High height, use highest hole.
(1) Pin (N) Normal height (center hole)
(2) Seat bracket
(1) Pin (L) Low height (lowest hole)
(2) Seat bracket