Replacing Slow-Blow Fuses; Replacing Light Bulb; Checking Hydraulic Tank Suction Strainer - Kubota RTV-X900G Operator's Manual

BReplacing Slow-Blow Fuses
The slow-blow fuses are intended to protect the electrical
cabling. If any of them have blown out, be sure to pinpoint
the cause. Never use any substitute, use only a KUBOTA
genuine part.
C Replacement procedure
1. Disconnect the negative cable of the battery.
2. Open the seats and remove the maintenance cover.
3. Remove the fuse box cover.
4. Pull out the slow-blow fuse.
5. Insert a new slow-blow fuse into the fuse box.
6. Install the fuse box cover and the maintenance cover.
7. Connect the negative battery cable.
BReplacing Light Bulb
1. Head light
Take the bulb out of the light body and replace it with
a new one.
2. Other lights
Detach the lens and replace the bulb.
Light
Head light
Turn signal / Hazard light
Front position light
Stop light
Tail light
Number plate light
Capacity
35 W / 35 W
21 W
5 W
21 W
10 W
10 W
PERIODIC SERVICE
BChecking Hydraulic Tank Suction Strainer
1. Make sure that the hydraulic tank is not damaged and
the oil does not leak out of the hydraulic tank.
2. Make sure that the water is not mixed with the oil.
3. When the suction strainer is dirty, wash it with the light
oil.
(1) Hydraulic tank
(2) Suction strainer
97