Checking Parking Brake; Checking Easy Checker(Tm); Checking Head Light, Turn Signal Light Etc; Checking Seat Belt And Rops - Kubota RTV-X900G Operator's Manual

BChecking Parking Brake
Pull the parking brake lever to apply the brakes. With the
key switch at "ON" position, the parking brake indicator on
the instrument panel lights up. To release the brakes,
push in the button at the side of the parking brake lever
and tilt the lever forward.
A Make sure the parking brake warning lamp
Easy Checker(TM) goes off when parking brake lever
is forward.
(1) Parking brake lever
(2) Release button
BChecking Easy Checker(TM)
1. Inspect the instrument panel for broken Easy
Checker(TM) lamps.
2. Consult your local KUBOTA Dealer if broken.
BChecking Head Light, Turn Signal Light
etc.
1. Inspect the lights for broken bulbs and lenses.
2. Replace if broken.
BChecking Seat Belt and ROPS
1. Always check condition of the seat belts and ROPS
before operating the vehicle.
2. Replace if damaged.
on the
(A) "PULL"
(B) "RELEASE"
PERIODIC SERVICE
BChecking Joint Boot
1. Check to see if the joint boots are not damaged.
2. If the boots are cuts, cracked or shows signs of
deterioration, consult your local KUBOTA Dealer.
(1) Joint boot
(2) Front drive shaft
(3) Tie rod
(1) Joint boot
(2) Front drive shaft
69