Airwell Wellea Split A R32 Installation Manual page 66

OPERATION PARAMETER
FAN SPEED 600R/MIN
IDU TARGET FREQUENCY 46Hz
FREQUENCY LIMITED TYPE
SUPPLY VOLTAGE
DC GENERATRIX VOLTAGE
DC GENERATRIX CURRENT
ADDRESS
7/9
The power consumption parameter is preparatory. some parameter is not be activated in the system, the parameter will
show "--"
The heat pump capacity is for reference only, not used to judge the ability of the unit. The accuracy of sensor is ±1℃.
The flow rates parameters are calculated according to the pump running parameters,the deviation is different at different flow
rates,the maximum of deviation is 25%.
#00 OPERATION PARAMETER
TW_O PLATE W-OUTLET TEMP. 35°C
TW_I PLATE W-INLET TEMP.
5 T2 PLATE F-OUT TEMP.
230V T2B PLATE F-IN TEMP.
420V Th COMP. SUCTION TEMP.
18A Tp COMP. DISCHARGE TEMP.
ADDRESS
NOTE
65
#00 OPERATION PARAMETER
T3 OUTDOOR EXCHARGE TEMP. 5°C
30°C T4 OUTDOOR AIR TEMP.
35°C TF MODULE TEMP.
35°C P1 COMP. PRESSURE
5°C ODU SOFTWARE
75°C HMI SOFTWARE
ADDRESS
8/9
#00
5°C
55°C
2300kPa
01-09-2018V01
01-09-2018V01
9/9