ELECTRO FREEZE Compact Series Operator's Manual page 26

ELECTRO FREEZE Shake Model CS705
6.2 Disassembly Instructions
BLADE-SCRAPER
Figure 6-3 Beater Shaft Assembly
16
BLADE-SCRAPER
11. Remove the beater bearing
bushing (figure 6-2, 3) and beater shaft
(figure 6-3) from the cylinder. Then remove
the scraper blades (2) and shaft seal (3,4)
from the beater shaft (1). Remove the cup
seals (3) from the washer (4) on the shaft
seal assembly . Remove the drip tray.
12. Remove the mix feed tube assem-
bly from the hopper, as shown in figure 6-4
and remove the o-rings (2).
13. Remove the float from the hopper.
14. Wipe off all lubricants with paper
towel.
— continued
SEAL (CUP)-BEATER SHAFT
SHAFT-BEATER
SEAL-BEATER
SHAFT (CUP)
Tube-Mix
Feed
O-Ring
Figure 6-4 Diassemble Mix Feed Tube
SEAL(CUP)-BEATER SHAFT
WASHER-DOUBLE SHAFT
SEAL
O-Ring
Insert-Assy.
Mix Feed
184592