ELECTRO FREEZE Compact Series Operator's Manual page 52

ELECTRO FREEZE Shake Model CS705
13 Troubleshooting Charts
PROBLEM
Compressor 1. Defective torque control.
and beater
motor
operates only
when
dispensing.
Compressor 1.
will not start –
hums
intermittently
2.
(cycling on
overload)
3.
4.
NOTE: Contact your authorized Electro Freeze distributor for
Keep your freezer in excellent condition. Always contact your
Electro Freeze distributor for replacement parts and
maintenance scheduling.
42
PROBABLE CAUSE
Improperly wired.
Low line voltage.
Open start capacitor. (Single phase only)
Defective compressor
instructions prior to warranty compressor replacement.
— continued
REMEDY
1. Contact your Electro Freeze Distributor for
service.
1. Contact your Electro Freeze Distributor
for service.
2. Ask power company to increase voltage
to not less than 10% below dataplate
rating or have transformer installed. Have
wire checked for inadequate wire size.
3. Contact your Electro Freeze Distributor
for service.
4. Contact your Electro Freeze Distributor
for service.
QUALITY PARTS
PROTECT
YOUR
EQUIPMENT
184592