Cabletron Systems SmartSwitch 6E122 Supplement Manual page 46

Chapter 1: Changes to Local Management Screens
HIGH SPEED INTERFACE CONFIGURATION
The High Speed Interface Configuration screen selection does
NOTE
not display unless an optional interface module is installed.
The High Speed Interface Configuration screen provides access to the
Fast Ethernet Interfaces screen and the HSIM screen. For details, refer to
Section 1.12.
SMARTTRUNK CONFIGURATION
Used to logically group interfaces together to create a greater bandwidth
uplink. Refer to the Cabletron Systems SmartTrunk User's Guide for
information about how to access and use the SmartTrunk screens.
PORT REDIRECT CONFIGURATION
Used to access the Redirect Configuration Menu screen, which provides
access to the Port Redirect Configuration and VLAN Redirect
Configuration screens. For details, refer to
BROADCAST SUPPRESSION CONFIGURATION
Used to set a desired limit of received broadcast frames that are forwarded
out other interfaces. For details, refer to
REPEATER CONFIGURATION MENU
Used to access the Repeater Level Security Configuration and Port Level
Security Configuration screens for the 6E123-50 and 6E133-49, or to
access the Repeater Port Configuration, Module Level Security
Configuration, and Port Level Security Configuration for the 6H123-50
and 6H133-49.
This menu item applies only to the 6E123-50, 6E133-49, 6H123-50, and
6H133-37 repeater devices. For details, refer to
6E123-50 and 6E133-49, and
1-28
Section
Section
Chapter 3 for the 6H123-50 and 6H133-37.
Local Management Supplement
1.14.
1.17.
Chapter 2 for the