Cabletron Systems SmartSwitch 6E122 Supplement Manual page 41

EXECUTE
Download Server IP and Download File Name display only
NOTE
when TFTP or RUNTIME are selected in Download Method.
The following briefly defines each field of the Flash Download screen:
Download Method (Selectable)
This field steps between TFTP, RUNTIME and BOOTP. If set for
BOOTP, the module sends out a BootP request to determine the IP
address of the TFTP server and the filename of the image to be
downloaded. If set for TFTP or RUNTIME, the module attempts a TFTP
download based on the IP address and filename entered in the fields at the
bottom of the Flash Download screen.
Section 1.9.1 describes how to download using TFTP.
describes how to download using RUNTIME.
how to download using BootP.
Local Management Supplement
Flash Download Configuration Screen
Download Method:
Reboot After Download:
TFTP Gateway IP Addr:
Last Image Server IP:
Last Image File Name:
Download Server IP:
Download File Name:
Figure 1-10 Flash Download Screen
RUNTIME
[YES]
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
/tftpboot/xxxxx.fls
nnn.nnn.nnn.nnn
/tftpboot/xxxxx.fls
EXIT
Section 1.9.3
RETURN
2971-49
Section 1.9.2
describes
1-23