The Trap Table Screen - Cabletron Systems HubSTACK SEHI-34 User Manual

LOCAL MANAGEMENT
Exiting the Configuration Screen
1. To exit the Configuration screen, press the appropriate Function
key. To return to the Feature Selection screen, use the arrow keys
to highlight the RETURN command.
2. Press the Return key. The Feature Selection screen appears.

6.3.3 The Trap Table Screen

To access the Trap Table screen from the Features Selection screen,
use the arrow keys to highlight the Component Trap Table option,
then press the Return key or F8. The Trap Table screen shown in
Figure 6-6 appears.
The Trap Table defines the management stations that will receive
SNMP Traps for alarm/event notification. The following sections
explain each field on the Trap Table screen and instructions on how to
change them.
Page 6-14
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
SNMP Community Name
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
SAVE COMMUNITY NAMES
F6 F7
Figure 6-6. Trap Table Screen
TRAP TABLE
Traps
N
N
N
N
N
N
N
N
IP TABLE SNMP TOOLS
F8 F9
IP Address
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
RETURN