Adjusting The Projected Image; Adjusting The Projector's Height - Christie Inspire Series Installation And Setup Manual

Adjusting the Projected Image

Adjust the projected image's height and horizontal tilt for better viewing.

Adjusting the Projector's Height

The projector is equipped with elevator feet for adjusting the image height.
1. Locate the adjustable foot you want to modify on the underside of the projector.
2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it.
3. Repeat with the remaining feet as needed.
For stacking application, the elevator feet of the upper projector must be adjusted to increase the
height of this projector to avoid the interference between two projectors. For more information on
stacking projectors, please refer to
Inspire Series Installation and Setup Guide
020-001933-01 Rev. 1 (10-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Stacking Application
on page 26.
Installation and setup
22