Connecting To Video Equipment - Christie Inspire Series Installation And Setup Manual

Connecting to video equipment

Learn what cable/connectors may be used to connect to various video sources.
Router / DVD player, set-top box Audio output
network switch
3
Remote control
2
Motorized screen
1
Second projector
3D glasses
ID Connector name
1 12V DC jack
2 Wired remote control cable
3 RJ-45 cable
4 HDMI cable
5 RCA component cable
• After connecting the projector to an input device, the projector automatically detects the input
source. You can also select an input source by pressing INPUT.
• Due to the difference in applications for each country, the accessories required in some regions
may differ from those shown.
• The diagrams are for illustrative purposes only and do not indicate these accessories are supplied
with the projector.
Inspire Series Installation and Setup Guide
020-001933-01 Rev. 1 (10-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
HDTV receiver
7
4 6
5
ZOOM FOCUS
10
9
8
ID
6
7
8
9
10
Power socket
Connector name
Audio cable
Audio cable
Power cord
3D emitter cable
Mini-DIN cable (3-pin)
Connecting to devices
32