Setting The Out Of Band Ip Address; Setting The Default Gateway - Cabletron Systems MicroMMAC 22ES User Manual

Local management

Hide thumbs Also See for MicroMMAC 22ES:

Table of Contents

Chapter 4: System Level Screen

4.5 SETTING THE OUT OF BAND IP ADDRESS

To set the Out of Band IP Address, perform the following steps:

1. Use the arrow keys to highlight the Out of Band IP Addr field.

2. Enter the IP address using Decimal Dotted Notation (DDN) format.

For example: 134.141.25.17

3. Press ENTER. If the IP address entered was a valid format, the cursor

returns to the beginning of the Out of Band IP Address field. If the

entry was not valid, the Event Message field displays "INVALID IP

ADDRESS OR FORMAT ENTERED." Local Management does not

alter the current value and refreshes the IP Address field with the

previous value.

4. Use the arrow keys to highlight the SAVE command field.

5. Press ENTER. The Event Message field at the top of the screen

displays "SAVED OK."

To set the default gateway, perform the following steps:

1. Use the arrow keys to highlight the Default Gateway field.

2. Enter the IP address of the default gateway using DDN format.

For example: 134.141.79.121

3. Press ENTER. If the default gateway address entered was a valid

format, the cursor returns to the beginning of the Default Gateway

field. If the entry was not valid, the Event Message field displays

"INVALID DEFAULT GATEWAY OR FORMAT ENTERED."

Local Management does not alter the current value and refreshes the

Default Gateway field with the previous value.

4. Use the arrow keys to highlight the SAVE command field.

5. Press ENTER. The Event Message field at the top of the screen

displays "SAVED OK."

Page 4-6

MicroMMAC Local Management User's Guide

Table of Contents