Table of Contents
Advertisement
11.2 MIB NAVIGATOR COMMAND SET OVERVIEW
Use the help command for an on-line description of each MIB
navigator command. For example
TIP
provides help information for the branch command.
The MIB Navigator command set provides the following commands:
Navigation Commands
Navigation commands allow you to access and manage the MIB for the
device running the MIB Navigator. Some of these commands also provide
user community-string information. The commands are as follows:
– branch
– get
– pwd
– tree
Other Commands
Other commands allow you to access and manage network devices
connected to the device running the MIB Navigator. The commands are as
follows:
– arp
– snmpbranch
– traceroute
Special Commands
Special Commands allow you to exit from the MIB Navigator. The
commands are as follows:
– done
MicroMMAC Local Management User's Guide
MIB Navigator Command Set Overview
– cd
– ls
– set
– whoami
– defroute
– snmpget
– show
– quit
MIB Nav-> help branch
-mib2
-ctron
– netstat
– snmpset
-reset
– exit
– dir
– next
– su
– ping
– snmptree
-bridge
Page 11-3
Advertisement
Table of Contents
