Table of Contents
Advertisement
Chapter 8: Bridge Setup Screen
8.4 SELECTING THE BRIDGE PORT PAIR
ADMINISTRATIVE STATUS
To select the bridge port pair administrative status, perform the following
steps:
1. Use the arrow keys to highlight the [BRIDGE_PORT XX] field at the
bottom of the Bridge Setup screen.
2. Press SPACE or BACKSPACE to select the bridge port you want to
configure. The selected bridge port appears in the Bridge Port Pair
Admin Status field.
3. Use the arrow keys to highlight the BRIDGE PORT PAIR ADMIN
STATUS: PORT X - -> PORT [Y] field.
4. Press SPACE or BACKSPACE to select the port you want to enable
or disable bridge traffic.
5. Use the arrow keys to highlight the BRIDGE PORT PAIR ADMIN
STATUS: PORT X - -> PORT [Y] [ENABLED] field.
6. Press SPACE or BACKSPACE to select ENABLE or DISABLE.
For example, the following bridge setup indicates that bridge port 01
is configured NOT to bridge traffic to bridge port 02:
BRIDGE PORT PAIR ADMIN STATUS: PORT 01 - - > PORT [02]
[DISABLED]
7. Use the arrow keys to highlight the SAVE command field.
8. Press ENTER. The Event Message field at the top of the screen
displays "SAVED OK."
Page 8-4
MicroMMAC Local Management User's Guide
Advertisement
Table of Contents
