Table of Contents
Advertisement
8.3 SELECTING THE PORT ADMINISTRATIVE STATUS
To select the bridge port administrative status, perform the following
steps:
1. Use the arrow keys to highlight the [BRIDGE_PORT XX] field at the
bottom of the Bridge Setup screen.
2. Press SPACE or BACKSPACE to select the bridge port you want to
configure. The selected bridge port appears in the Bridge Port Admin
Status field.
3. Use the arrow keys to highlight the BRIDGE PORT ADMIN
STATUS: PORT X - - > ALL PORTS [ENABLED] field.
4. Press SPACE or BACKSPACE to select ENABLE or DISABLE.
For example, the following bridge setup indicates that bridge port 01
is configured to bridge traffic to all ports:
BRIDGE PORT ADMIN STATUS: PORT 01 - - > ALL PORTS
[ENABLED]
5. Use the arrow keys to highlight the SAVE command field.
6. Press ENTER. The Event Message field at the top of the screen
displays "SAVED OK."
MicroMMAC Local Management User's Guide
Selecting the Port Administrative Status
Page 8-3
Advertisement
Table of Contents
