10.4 ENABLING PORTS
The ENABLE PORT command lets you enable the port selected in the
PORT command field. You must first use the PORT command to select
the desired port.
To set the ENABLE PORT command, perform the following steps:
1. Use the arrow keys to highlight the ENABLE PORT command field
at the bottom of the screen.
2. Press ENTER.
10.5 DISABLING PORTS
The DISABLE PORT command lets you disable the port selected in the
PORT command field. You must first use the PORT command to select
the desired port.
To set the DISABLE PORT command, perform the following steps:
1. Use the arrow keys to highlight the DISABLE PORT command field
at the bottom of the screen.
2. Press ENTER.
MicroMMAC Local Management User's Guide
Enabling Ports
Page 10-5