Cabletron Systems MicroMMAC 22ES User Manual page 61

Enable Port
Use this command field to enable a selected port.
Disable Port
Use this command to disable a selected port.
Update-Freq
Use this field to select the time interval between Interface/Module/Port
counter updates. You can select update intervals in increments of 3
seconds, with the maximum interval being 99 seconds.
Interface
Use this command to select the interface you want to monitor.
Module
Use this command to view the statistics for a selected module in the stack.
The MicroMMAC is module 1. Each SEH in the stack follows in
sequential order. Figure 10-2 shows each module number in the stack.
Port
Use this command to select and view port statistics for each
MicroMMAC port.
MicroMMAC Local Management User's Guide
SEH - MODULE 5
SEH - MODULE 4
SEH - MODULE 3
SEH - MODULE 2
MicroMMAC - MODULE 1
Figure 10-2 Module Number Sequence
Bridge Statistics Screen Fields
Page 10-3